Saturday, February 25, 2017

VMware ESXi 6.0 Update 3 Released 2/24/2017!

vSphere 6.0 Update 3 Release Note here...

The major items are the Build number, What's New and Resolved Items.

ESXi 6.0 Update 3 | 24 FEB 2017 | ISO Build 5050593

What's New

  • Updated ESXi Host Client: VMware ESXi 6.0 Update 3 includes an updated version of the ESXi Host Client, version 1.14.0. The updated Host Client includes bug fixes and brings it much closer to the functionality provided by the vSphere Client. If you updated the Host Client through ESXi 6.0 patch releases, then install version 1.14.0 provided with ESXi 6.0 U3. In addition, new versions of the Host Client continue to be released through the VMware Labs Flings website. However, these Fling releases are not officially supported and not recommended for production environments.
  • Support for TLS: Support for TLSv1.0, TLSv1.1 and TLSv1.2 are enabled by default and configurable for ESXi 6.0 Update 3. Learn how to configure TLSv1.0,TLSv1.1 and TLSv1.2 from VMware Knowledge Base article 2148819. For a list of VMware products supported for TLSv1.0 disablement and the use of TLSv1.1/1.2, consult VMware Knowledge Base article 2145796.
  • vSAN Performance: Multiple fixes are introduced in this VMware ESXi 6.0 Update 3 release to optimize I/O path for improved vSAN perfoamance in All Flash and Hybrid configurations:
    • Log management and storage improvements were made that enable more logs to be stored per byte of storage. This should significantly improve performance for write-intensive workloads. Because vSAN is a log based file system, efficient management of log entries is key to preventing unwarranted build up of logs.
    • In addition to increasing the packing density of the log entries, for scenarios involving large file being deleted while data services is turned on, vSAN preemptively de-stages data to the capacity tier which efficiently manages the log growth.
    • The checksum code path is now more efficient. 

Resolved Issues

The resolved issues are grouped as follows.
CIM and API Issues
  • The Mware provider method used to validate user permissions does not work for username and password after you exit lockdown mode
    After the server is removed from lockdown mode, the VMware provider method returns a different value that is not compatible with the value before getting into the lockdown mode. The issue results in the VMware provider method to validate user permissions not to work with the same username and password as it did before the lockdown mode. This issue is resolved in this release.
Miscellaneous Issues
  • Upgrading VMware Tools on multiple VMs might fail
    Attempts to upgrade VMware Tools on multiple VMs simultaneously through Update Manager might fail. Not all VMs complete the upgrade process. This issue is resolved in this release.
  • High read load of VMware Tools ISO images might cause corruption of flash media
    In VDI environment, the high read load of the VMware Tools images can result in corruption of the flash media. This issue is resolved in this release.
    You can copy all the VMware Tools data into its own ramdisk. As a result, the data can be read from the flash media only once per boot. All other reads will go to the ramdisk. vCenter Server Agent (vpxa) accesses this data through the /vmimages directory which has symlinks that point to productLocker.
    To activate this feature, follow the steps:
    1. Use the command to set the advanced ToolsRamdisk option to 1:
    2. esxcli system settings advanced set -o /UserVars/ToolsRamdisk -i 1
    3. Reboot the host.
  • The syslog.log file might get flooded with Unknown error messages
    In ESXi 6.0 update 2, hosts with Dell CIM provider can have their syslog.log file flooded with Unknown error messages if the Dell CIM provider is disabled or in an idle state. Also, when the ESXi 6.0 update 2 host reboots, the syslog.log file might log error messages intermittently with Unknown entries. This issue is resolved in this release.
  • Userworld core dump failure
    A userworld dump might fail when a user process runs out of memory. The error message, Unable to allocate memory, is displayed. This issue is resolved in this release. The fix provides a global memory for heap allocation of userworld core dump, which is used when any process runs out of memory.
  • Attempts to run failover for a VM fail with an error when synchronizing storage
    Attempts to run failover for a VM might fail with an error message similar to the following during the synchonize storage operation:

    An error occurred while communicating with the remote host.

    The following messages are logged in the HBRsrv.log file:

    YYYY-MM-DDT13:48:46.305Z info hbrsrv[nnnnnnnnnnnn] [Originator@6876 sub=Host] Heartbeat handler detected dead connection for host: host-9
    YYYY-MM-DDT13:48:46.305Z warning hbrsrv[nnnnnnnnnnnn] [Originator@6876 sub=PropertyCollector] Got WaitForUpdatesEx exception: Server closed connection after 0 response bytes read; 171:53410'>, >)>


    Also on the ESXi host, the hostd service might stop responding with messages similar to the following:

    YYYY-MM-DDT13:48:38.388Z panic hostd[468C2B70] [Originator@6876 sub=Default]
    -->
    --> Panic: Assert Failed: "progress >= 0 && progress <= 100" @ bora/vim/hostd/vimsvc/HaTaskImpl.cpp:557
    --> Backtrace:
    -->
    This issue is resolved in this release.
  • Log messages persistently reported in the hostd.log file every 90 seconds
    Log messages related to Virtual SAN similar to the following are logged in the hostd.log file every 90 seconds even when the Virtual SAN is not enabled:

    { YYYY-MM-DDT06:50:01.923Z info hostd[nnnnnnnn] [Originator@6876 sub=Hostsvc opID=21fd2fe8] VsanSystemVmkProvider : GetRuntimeInfo: Complete, runtime info: (vim.vsan.host.VsanRuntimeInfo) {
    YYYY-MM-DDT06:51:33.449Z info hostd[nnnnnnnn] [Originator@6876 sub=Hostsvc opID=21fd3009] VsanSystemVmkProvider : GetRuntimeInfo: Complete, runtime info: (vim.vsan.host.VsanRuntimeInfo) {
    YYYY-MM-DDT06:53:04.978Z info hostd[nnnnnnnn] [Originator@6876 sub=Hostsvc opID=21fd3030] VsanSystemVmkProvider : GetRuntimeInfo: Complete, runtime info: (vim.vsan.host.VsanRuntimeInfo) {
    This issue is resolved in this release.
  • Upgrading VMware Tools on multiple VMs might fail
    Attempts to upgrade VMware Tools on multiple VMs simultaneously through Update Manager might fail. If this issue occurs, VMware Tools for some VMs might not be upgraded. This issue is resolved in this release.
Networking Issues
  • ARP request packets might drop
    ARP request packets between two VMs might be dropped if one VM is configured with guest VLAN tagging and the other VM is configured with virtual switch VLAN tagging, and VLAN offload is turned off on the VMs.
  • ESXi firewall configuration might get disabled due to scripted upgrade
    The ESXi firewall configuration might be disabled after scripted upgrade of ESXi 6.0 Update 1 or later using kick start file over NFS or FTP. This issue is resolved in this release.
  • The virtual MAC address of 00:00:00:00:00:00 is used during communication for a newly added physical NIC even after a host reboot
    A newly added physical NIC might not have the entry in the esx.conf file after a host reboot, resulting in a virtual MAC address of 00:00:00:00:00:00 listed for physical NIC during communication. This issue is resolved in this release.
  • Error message displayed during the boot stage
    Under certain conditions while the ESXi installer reads the installation script during the boot stage, an error message similar to the following is displayed:

    VmkNicImpl::DisableInternal:: Deleting vmk0 Management Interface, so setting advlface to NULL This issue is resolved in this release.
  • Physical switch flooded with RARP packets when using Citrix VDI PXE boot
    When you boot a virtual machine for Citrix VDI, the physical switch is flooded with RARP packets (over 1000) which might cause network connections to drop and a momentary outage. This release provides an advanced option /Net/NetSendRARPOnPortEnablement. You need to set the value for /Net/NetSendRARPOnPortEnablement to 0 to resolve this issue.
  • An ESXi host might fail with purple diagnostic screen
    An ESXi host might fail with purple diagnostic screen. This happens when DVFilter_TxCompletionCB() is called to complete a dvfilter share memory packet, it frees the IO complete data stored inside the packet, but sometimes, this data member becomes 0 which causes a NULL pointer exception. An error message similar to the following is displayed:

    YYYY-MM-DDT04:11:05.134Z cpu24:33420)@BlueScreen: #PF Exception 14 in world 33420:vmnic4-pollW IP 0x41800147d76d addr 0x28
    PTEs:0x587e436023;0x587e437023;0x587e438023;0x0;
    YYYY-MM-DDT04:11:05.134Z cpu24:33420)Code start: 0x418000800000 VMK uptime: 23:18:59:55.570
    YYYY-MM-DDT04:11:05.135Z cpu24:33420)0x43915461bdd0:[0x41800147d76d]DVFilterShmPacket_TxCompletionCB@com.vmware.vmkapi#v2_3_0_0+0x3d sta
    YYYY-MM-DDT04:11:05.135Z cpu24:33420)0x43915461be00:[0x41800146eaa2]DVFilterTxCompletionCB@com.vmware.vmkapi#v2_3_0_0+0xbe stack: 0x0
    YYYY-MM-DDT04:11:05.136Z cpu24:33420)0x43915461be70:[0x418000931688]Port_IOCompleteList@vmkernel#nover+0x40 stack: 0x0
    YYYY-MM-DDT04:11:05.136Z cpu24:33420)0x43915461bef0:[0x4180009228ac]PktListIOCompleteInt@vmkernel#nover+0x158 stack: 0x0
    YYYY-MM-DDT04:11:05.136Z cpu24:33420)0x43915461bf60:[0x4180009d9cf5]NetPollWorldCallback@vmkernel#nover+0xbd stack: 0x14
    YYYY-MM-DDT04:11:05.137Z cpu24:33420)0x43915461bfd0:[0x418000a149ee]CpuSched_StartWorld@vmkernel#nover+0xa2 stack: 0x0
    This issue is resolved in this release.
Security Issues
  • Update to the Likewise Kerberos
    The Likewise Kerberos is updated to version 1.14.
  • Update to OpenSSL
    The OpenSSL is updated to version openssl-1.0.2j.
  • Update to PAM
    The PAM is updated to version 1.3.0.
  • Update to the libPNG library
    The libPNG library is updated to libpng-1.6.26.
  • Update to the NTP package
    The ESXi NTP package is updated to version 4.2.8p9.
  • Update to the libcurl library
    The ESXi userworld libcurl library is updated to libcurl- 7.51.0.
Server Configuration Issues

  • Connectivity to ESXi host is lost from vCenter Server when host profile is reapplied to a stateless ESXi host
    When a host profile with vmknic adapters in both vSphere Standard Switch and vSphere Distributed Switch is applied to an ESXi host, it might remove the vmknic adapter vmk0 (management interface) from vSphere Standard Switch which could result in the host being disconnected from vCenter Server. This issue is resolved in this release.
  • The hostd service might fail when taking quiesced snapshot
    The hostd service might fail when performing a quiesced snapshot operation during replication process. An error message similar to the following appears in the hostd.log file: 2016-06-10T22:00:08.582Z [37181B70 info 'Hbrsvc'] ReplicationGroup will retry failed quiesce attempt for VM (vmID=37) 2016-06-10T22:00:08.583Z [37181B70 panic 'Default'] --> -->Panic: Assert Failed: "0" @ bora/vim/hostd/hbrsvc/ReplicationGroup.cpp:2779 This issue is resolved in this release.
  • ESXi 6.0 Update 1 hosts might fail with a purple diagnostic screen when collecting statistics
    ESXi hosts with a large number of physical CPUs might stop responding during statistics collection. This issue occurs when the collection process attempts to access pages that lie beyond the range initially assigned to it. This issue is resolved in this release.
  • ESXi patch update might fail with a warning message if the image profile size is larger than set limit
    An ESXi patch update installation might fail if the size of the target profile file is larger than 239 MB. This might happen when you upgrade the system using ISO causing image profile size larger than 239MB without getting any warning message. This will prevent any additional VIBs from being installed on the system. This issue is resolved in this release.
  • The vmkernel.log file is spammed with multiple USB suspend and resume events
    The vmkernel.log file is spammed with multiple USB resumed and suspended events similar to the following:

    YYYY-MM-DDT
    This issue is resolved in this release.
  • Unable to see the user or group list for assigning permissions in the Permission tab
    Unable to see the users or groups list for assigning permissions in the Permission tab and authentication might fail for the trusted domain's user. The issue occurs when the DNS domain name of a machine is different from the DNS name of the AD domain. This issue is resolved in this release. However, after you upgrade the ESXi host to ESXi 6.0 Update 3, you must remove it from the AD domain and re-add it to the same domain.
  • ESXi host might stop responding and display a purple diagnostic screen
    When the Dump file set is called using the esxcfg-dumppart or other commands multiple times in parallel, an ESXi host might stop responding and display a purple diagnostic screen with entries similar to the following as a result of a race condition while dump block map is freed up:

    @BlueScreen: PANIC bora/vmkernel/main/dlmalloc.c:4907 - Corruption in dlmalloc
    Code start: 0xnnnnnnnnnnnn VMK uptime: 234:01:32:49.087
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]PanicvPanicInt@vmkernel#nover+0x37e stack: 0xnnnnnnnnnnnn
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]Panic_NoSave@vmkernel#nover+0x4d stack: 0xnnnnnnnnnnnn
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]DLM_free@vmkernel#nover+0x6c7 stack: 0x8
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]Heap_Free@vmkernel#nover+0xb9 stack: 0xbad000e
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]Dump_SetFile@vmkernel#nover+0x155 stack: 0xnnnnnnnnnnnn
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]SystemVsi_DumpFileSet@vmkernel#nover+0x4b stack: 0x0
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]VSI_SetInfo@vmkernel#nover+0x41f stack: 0x4fc
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]UWVMKSyscallUnpackVSI_Set@#+0x394 stack: 0x0
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]User_UWVMKSyscallHandler@#+0xb4 stack: 0xffb0b9c8
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]User_UWVMKSyscallHandler@vmkernel#nover+0x1d stack: 0x0
    0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]gate_entry_@vmkernel#nover+0x0 stack: 0x0

    This issue is resolved in this release.
Storage Issues
  • Unable to remove stale Virtual Volume volumes and VMDK files using esxcli vvol abandonedvvol command
    Attempts use the esxcli storage vvol storagecontainer abandonedvvol command to clean the stale Virtual Volume volume and the VMDK files that remain on the Virtual Volume volume are unsuccessful. This issue is resolved in this release.
  • Snapshot creation task cancellation for Virtual Volumes might result in data loss
    Attempts to cancel snapshot creation for a VM whose VMDKs are on Virtual Volumes datastores might result in virtual disks not getting rolled back properly and consequent data loss. This situation occurs when a VM has multiple VMDKs with the same name and these come from different Virtual Volumes datastores.
    This issue is resolved in this release.
  • VMDK does not roll back properly when snapshot creation fails for Virtual Volumes VMs
    When snapshot creation attempts for a Virtual Volumes VM fail, the VMDK is tied to an incorrect data Virtual Volume. The issue occurs only when the VMDK for the Virtual Volumes VM comes from multiple Virtual Volumes datastores. This issue is resolved in this release.
  • VM I/O operations stall or cancel when the underlying storage erroneously returns a miscompare error during periodic VMFS heartbeating.
    VMFS uses the SCSI compare-and-write command, also called ATS, for periodic heartbeating. Any miscompare error during ATS command execution is treated as a lost heartbeat and the datastore initiates a recovery action. To prevent corruption, all I/O operations on the device are canceled. When the underlying storage erroneously reports miscompare errors during VMFS heartbeating, the datastore initiates an unnecessary recovery action.
    This issue is resolved in this release.
  • ESXi 6.x hosts stop responding after running for 85 days
    When this problem occurs, the /var/log/vmkernel log file displays entries similar to the following:

    YYYY-MM-DDTHH:MM:SS.833Z cpu58:34255)qlnativefc: vmhba2(5:0.0): Recieved a PUREX IOCB woh oo
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:34255)qlnativefc: vmhba2(5:0.0): Recieved the PUREX IOCB.
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674)qlnativefc: vmhba2(5:0.0): sizeof(struct rdp_rsp_payload) = 0x88
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674qlnativefc: vmhba2(5:0.0): transceiver_codes[0] = 0x3
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674)qlnativefc: vmhba2(5:0.0): transceiver_codes[0,1] = 0x3, 0x40
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674)qlnativefc: vmhba2(5:0.0): Stats Mailbox successful.
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674)qlnativefc: vmhba2(5:0.0): Sending the Response to the RDP packet
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh Fh
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674)--------------------------------------------------------------
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 53 01 00 00 00 00 00 00 00 00 04 00 01 00 00 10
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) c0 1d 13 00 00 00 18 00 01 fc ff 00 00 00 00 20
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 00 00 00 00 88 00 00 00 b0 d6 97 3c 01 00 00 00
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh Fh
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674)--------------------------------------------------------------
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 02 00 00 00 00 00 00 80 00 00 00 01 00 00 00 04
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 18 00 00 00 00 01 00 00 00 00 00 0c 1e 94 86 08
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 0e 81 13 ec 0e 81 00 51 00 01 00 01 00 00 00 04
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 2c 00 04 00 00 01 00 02 00 00 00 1c 00 00 00 01
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 00 00 00 00 40 00 00 00 00 01 00 03 00 00 00 10
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 50 01 43 80 23 18 a8 89 50 01 43 80 23 18 a8 88
    YYYY-MM-DDTHH:MM:SS.833Z cpu58:33674) 00 01 00 03 00 00 00 10 10 00 50 eb 1a da a1 8f
    This issue is caused by a qlnativefc driver bug sending a Read Diagnostic Parameters (RDP) response to the HBA adapter with an incorrect transfer length. As a result, the HBA adapter firmware does not free the buffer pool space. Once the buffer pool is exhausted, the HBA adapter is not able to further process any requests causing the HBA adapter to become unavailable. By default, the RDP routine is initiated by the FC Switch and occurs once every hour, resulting in the buffer pool being exhausted in approximately 80 to 85 days under normal circumstances.
    This issue is resolved in this release.
  • In vSphere 6.0, the HostMultipathStateInfoPath object of the Storage Policy API provides path value as Run Time Name vmhbaX:CX:TX:LX
    In ESXi 5.5, HostMultipathStateInfoPath provided path information in this format: HostWWN-ArrayWWN-LUN_ID, For example, sas.500605b0072b6550-sas.500c0ff1b10ea000-naa.600c0ff0001a20bd1887345701000000. However, in ESXi 6.0, the path value appears as vmhbaX:CX:TX:LX, which might impact users who rely on the HostMultipathStateInfoPath object to retrieve information such as HostWWN and ArrayWWN. This issue is resolved in this release. The HostMultipathStateInfoPath object now displays the path information as Run Time Name and HostWWN-ArrayWWN-LUN_ID.
    You can also use the esxcli storage core path list command to retrieve the path related information. This command provides the HostWWN and ArrayWWN details. For more information, see the Knowledge Base article 1003973.
  • An ESXi host might fail with a purple diagnostic screen
    An ESXi host with vFlash configured might fail with a purple diagnostic screen and an error message similar to PSOD: @BlueScreen: #PF Exception 14 in world 500252:vmx-vcpu-0:V. This issue is resolved in this release.
  • ESXi host fails with a purple diagnostic screen due to path claiming conflicts
    An ESXi host displays a purple diagnostic screen when it encounters a device that is registered, but whose paths are claimed by a two multipath plugins, for example EMC PowerPath and the Native Multipathing Plugin (NMP). This type of conflict occurs when a plugin claim rule fails to claim the path and NMP claims the path by default. NMP tries to register the device but because the device is already registered by the other plugin, a race condition occurs and triggers an ESXi host failure. This issue is resolved in this release.
  • File operations on large files fails as the host runs out of memory
    When you perform file operations such as mounting large files present on a datastore, these operations might fail on an ESXi host. This situation can occur when a memory leak in the buffer cache causes the ESXi host to run out of a memory, for example, when a non-zero copy of data results in buffers not getting freed. An error message similar to the following is displayed on the virtual machine.

    The operation on file /vmfs/volumes/5f64675f-169dc0cb/CloudSetup_20160608.iso failed. If the file resides on a remote file system, make sure that the network connection and the server where this disk resides are functioning properly. If the file resides on removable media, reattach the media. Select Retry to attempt the operation again. Select Cancel to end this session. Select Continue to forward the error to the guest operating system. This issue is resolved in this release.
  • Horizon View recompose operation might fail for desktop VMs residing in NFS datastore
    Horizon View recompose operation might fail for a few desktop VMs residing in NFS datastore with Stale NFS file handle error. This issue is resolved in this release.
Upgrade and Installation Issues
  • Upgrading ESXi with vSphere Update Manager fails if ESXi was deployed using dd image on USB and /altbootbank contains BOOT.CFG in upper case
    An ESXi dd image generated on certain versions of RHEL by using the esxiso2dd utility can contain BOOT.CFG in upper case in /altbootbank. If BOOT.CFG is in upper case, vSphere Update Manager fails to upgrade the host because the upgrade pre-checker accepts boot.cfg in lowercase only. This issue is resolved in this release.
  • Hostd fails when you upgrade ESXi 5.5.x hosts to ESXi 6.0.x with the ESXi 6.0 patch ESXi600-201611011 or higher
    You can observe this issue when you have installed an asynchronous HPSA driver that supports HBA mode. Although ESXi supports getting HPSA disk location information in HBA mode, problems might occur when one of the following conditions is met:

    • You installed an old hpssacli utility, version 2.10.14.0 or older.
    • You used an external array to connect the HPSA controller.
    These problems lead to hostd failures and the host becoming unreachable by vSphere Client and vCenter Server.
    This issue is resolved in this release. When you now use the esxcli command to get the disk location information, hostd does not fail. The esxcli command returns an error message similar to the following:
    # esxcli storage core device physical get -d naa.500003963c888808 Plugin lsu-hpsa-plugin cannot get information for device with name naa.500003963c888808. Error was: Invalid output for physicaldrive.
  • vSphere Update Manager upgrade of ESXi booted with dd image on USB might fail when /altbootbank contains BOOT.CFG (uppercase) instead of boot.cfg (lowercase)
    ESXi dd image generated on certain versions of RHEL using esxiso2dd utility contains BOOT.CFG (in uppercase) in /altbootbank, presence of BOOT.CFG causes vSPhere Update Manager upgrade of ESXi to fail because the upgrade pre-check looks for boot.cfg in lowercase only.
  • This issue is resolved in this release.
  • After upgrade to 6.0, the Image Profile name in the summary tab of the host is not updated properly
    When you use the esxcli software profile update command to apply a new Image Profile, the image profile name does not change to the new image profile name. Also when you use the ISO to perform the upgrade, the new image profile name is not marked as Updated. This issue is resolved in this release.
Virtual Machine Management Issues
  • vSphere Update Manager sends reboot reminders for VMware Tools when reboot already occurred after installation
    The VMware Tools installation error code displays that a reboot is required even after the reboot occurred after VMware Tools was installed. The guestInfo.toolsInstallErrCode variable on the virtual machine executable (VMX) side is not cleared when VMware Tools is successfully installed and reboot occurs. This causes vSphere Update Manager to send incorrect reminders to reboot VMware Tools. This issue is resolved in this release.
  • Hostd fails when ListProcesses run on guest operating system
    When a large number of processes are present in a guest operating system, the ListProcesses process is invoked more than once and the data from VMware Tools arrives in multiple chunks. When multiple ListProcesses calls to the guest OS (one for every chunk) are assembled together, the implementation creates a conflict. Multiple ListProcesses identify when all the data arrived and calls an internal callback handler. Calling the handler twice results in the failure of hostd. This issue is resolved in this release.
  • Possible data corruption or loss when a guest OS issues SCSI unmap commands and an IO filter prevents the unmap operation
    When a VM virtual disk is configured with IO filters and the guest OS issues SCSI unmap commands, the SCSI unmap commands might succeed even when one of the configured IO filters failed the operation. As a result, the state reflected in the VMDK diverges from that of the IO filter and data corruption or loss might be visible to the guest OS. This issue is resolved in this release.
  • An ESXi host might fail with purple diagnostic screen
    When a DVFilter_TxCompletionCB() operation attempts to complete a dvfilter share memory packet, it frees the IO complete data member stored inside the packet. In some cases, this data member becomes 0, causing a NULL pointer exception. An error message similar to the following is displayed:

    YYYY-MM-DDT04:11:05.134Z cpu24:33420)@BlueScreen: #PF Exception 14 in world 33420:vmnic4-pollW IP 0x41800147d76d addr 0x28 PTEs:0x587e436023;0x587e437023;0x587e438023;0x0; YYYY-MM-DDT04:11:05.134Z cpu24:33420)Code start: 0x418000800000 VMK uptime: 23:18:59:55.570 YYYY-MM-DDT04:11:05.135Z cpu24:33420)0x43915461bdd0:[0x41800147d76d]DVFilterShmPacket_TxCompletionCB@com.vmware.vmkapi#v2_3_0_0+0x3d sta YYYY-MM-DDT04:11:05.135Z cpu24:33420)0x43915461be00:[0x41800146eaa2]DVFilterTxCompletionCB@com.vmware.vmkapi#v2_3_0_0+0xbe stack: 0x0 YYYY-MM-DDT04:11:05.136Z cpu24:33420)0x43915461be70:[0x418000931688]Port_IOCompleteList@vmkernel#nover+0x40 stack: 0x0 YYYY-MM-DDT04:11:05.136Z cpu24:33420)0x43915461bef0:[0x4180009228ac]PktListIOCompleteInt@vmkernel#nover+0x158 stack: 0x0 YYYY-MM-DDT04:11:05.136Z cpu24:33420)0x43915461bf60:[0x4180009d9cf5]NetPollWorldCallback@vmkernel#nover+0xbd stack: 0x14 YYYY-MM-DDT04:11:05.137Z cpu24:33420)0x43915461bfd0:[0x418000a149ee]CpuSched_StartWorld@vmkernel#nover+0xa2 stack: 0x0 This issue is resolved in this release.
  • ESXi host with PCI passthru might stop responding and display a purple diagnostic screen
    When you reboot a VM with PCI Passthru multiple times, the ESXi host might stop responding and display a purple diagnostic screen with messages similar to the following in the vmware.log file:

    XXXXXXXXXXXXXXX| vcpu-0| W110: A core file is available in "/vmx-debug-zdump.000"
    XXXXXXXXXXXXXXX| vcpu-0| I120: Msg_Post: Error
    XXXXXXXXXXXXXXX| vcpu-0| I120: [msg.log.error.unrecoverable] VMware ESX
    XXXXXXXXXXXXXXX| vcpu-0| unrecoverable error: (vcpu-0)
    XXXXXXXXXXXXXXX| vcpu-0| I120+ vcpu-7:ASSERT vmcore/vmm/intr/intr.c:459
    This issue is resolved in this release.
  • The hostd service might fail during replication process
    The hostd service might fail when a quiesced snapshot operation fails during replication process. An error message similar to the following might be written to the hostd.log file:

    YYYY-MM-DDT22:00:08.582Z [37181B70 info 'Hbrsvc'] ReplicationGroup will retry failed quiesce attempt for VM (vmID=37)
    YYYY-MM-DDT22:00:08.583Z [37181B70 panic 'Default']
    -->
    --> Panic: Assert Failed: "0" @ bora/vim/hostd/hbrsvc/ReplicationGroup.cpp:2779
    This issue is resolved in this release.
  • The hostd service might stop responding if it encounters I/O failures for a VM provisioned with an LSI virtual SCSI controller
    An ESXi host might stop responding if it encounters storage I/O failures for a VM provisioned with an LSI virtual controller and memory is overcommitted on the ESXi host. This issue is resolved in this release.
Virtual SAN Issues
  • Intermittent failures in Virtual SAN cluster operations related to provisioning or resulting in new object creation
    A memory leak in the Cluster Level Object Manager Daemon (CLOMD) results in memory exhaustion over a long runtime causing the daemon to become temporarily unavailable. This issue is resolved in this release.
  • DOM module fails to initialize
    Description: The Cluster Level Object Manager Daemon (CLOMD) might not use Virtual SAN on an ESXi host with large number of physical CPUs. This issue can occur if the Virtual SAN DOM module fails to initialize when joining a cluster. An error message similar to the following is displayed in the clomd.log file:
    2016-12-01T22:34:49.446Z 2567759 Failed to run VSI SigCheck: Failure 2016-12-01T22:34:49.446Z 2567759 main: Clomd is starting 2016-12-01T22:34:49.446Z 2567759 main: Is in stretched cluster mode? No 2016-12-01T22:34:49.446Z 2567759 CLOMSetOptions: Setting forground to TRUE 2016-12-01T22:34:49.446Z 2567759 CLOMSetOptions: No default configuration specified. 2016-12-01T22:34:49.447Z 2567759 main: Starting CLOM trace 2016-12-01T22:34:49.475Z 2567759 Cannot open DOM device /dev/dom: No such file or directory 2016-12-01T22:34:49.475Z 2567759 Cannot connect to DOM: Failure 2016-12-01T22:34:49.475Z 2567759 CLOM_CleanupRebalanceContext: Cleaning up rebalancing state 2016-12-01T22:34:49.481Z 2567759 Failed to dump data 2016-12-01T22:34:49.481Z 2567759 2016-12-01T22:34:49.481Z 2567759 main: clomd exit
    This issue is resolved in this release.
  • ESXi host fails to rejoin VMware Virtual SAN cluster after a reboot
    Attempts to rejoin the VMware Virtual SAN cluster manually after a reboot might fail with the following error:

    Failed to join the host in VSAN cluster (Failed to start vsantraced (return code 2) This issue is resolved in this release.
  • Constant calling of VSAN API might result in display of a misleading task message
    In an environment with vCenter Server 6.0 Update 2 and Virtual SAN 6.2, calling the VSAN API constantly results in creation of tasks for registering a ticket to Virtual SAN VASA provider and a message similar to the following is displayed:

    Retrieve a ticket to register the Virtual SAN VASA Provider This issue is resolved in this release.
  • Virtual SAN Disk Rebalance task halts at 5% for more than 24 hours
    The Virtual SAN Health Service reports Virtual SAN Disk Balance warnings in the vSphere Web Client. When you click Rebalance disks, the task appears to halt at 5% for more than 24 hours. This issue is resolved in this release and the Rebalance disks task is shown as completed after 24 hours.
  • ESXi host might stop responding and display a purple diagnostic screen
    An ESXi host might stop responding and display a purple diagnostic screen with messages similar to the following:

    YYYY-MM-DDT22:59:29.686Z cpu40:84493)@BlueScreen: #PF Exception 14 in world 84493:python IP 0xnnnnnnnnnnnn addr 0xfffffffffffffff0 PTEs:0x0;
    YYYY-MM-DDT22:59:29.686Z cpu40:84493)Code start: 0xnnnnnnnnnnnn VMK uptime: 7:15:08:48.373
    YYYY-MM-DDT22:59:29.686Z cpu40:84493)0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]DOMClient_IsTopObject@com.vmware.vsan#0.0.0.1+0x18 stack: 0xnnnnnnnn
    YYYY-MM-DDT22:59:29.687Z cpu40:84493)0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]DOMListUuidTopHierarchyCbk@com.vmware.vsan#0.0.0.1+0x69 stack: 0x900
    YYYY-MM-DDT22:59:29.687Z cpu40:84493)0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]VSANUUIDTable_Iterate@com.vmware.vsanutil#0.0.0.1+0x4b stack: 0x139d
    YYYY-MM-DDT22:59:29.687Z cpu40:84493)0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]DOMVsi_ListTopClients@com.vmware.vsan#0.0.0.1+0x5a stack: 0x66
    YYYY-MM-DDT22:59:29.688Z cpu40:84493)0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]VSI_GetListInfo@vmkernel#nover+0x354 stack: 0xnnnnnnnnnnnn
    YYYY-MM-DDT22:59:29.688Z cpu40:84493)0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]UWVMKSyscallUnpackVSI_GetList@#+0x216 stack: 0xnnnnnnnnn
    YYYY-MM-DDT22:59:29.688Z cpu40:84493)0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]User_UWVMKSyscallHandler@#+0xb4 stack: 0xnnnnnnn
    YYYY-MM-DDT22:59:29.689Z cpu40:84493)0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]User_UWVMKSyscallHandler@vmkernel#nover+0x1d stack: 0x0
    YYYY-MM-DDT22:59:29.689Z cpu40:84493)0xnnnnnnnnnnnn:[0xnnnnnnnnnnnn]gate_entry_@vmkernel#nover+0x0 stack: 0x0
    This issue is resolved in this release.
  • ESXi hosts might fail with a purple diagnostic screen
    ESXi hosts in a Virtual SAN Cluster might fail with a purple diagnostic screen when a Virtual SAN resync operation is paused. This issue is resolved in this release.
VMware HA and Fault Tolerance Configuration Issues
  • ESXi host might fail when enabling fault tolerance on a VM
    An ESXi host might fail with a purple diagnostic screen when a Fault Tolerance Secondary VM fails to power on. This issue is resolved in this release.
  • vSphere Guest Application Monitoring SDK fails for VMs with vSphere Fault Tolerance enabled
    When vSphere FT is enabled on an vSphere HA-protected VM where the vSphere Guest Application Monitor is installed, the vSphere Guest Application Monitoring SDK might fail. This release significantly reduces the increase in the VM network latency when Fault Tolerance is enabled.
  • Increased latency when SMP Fault Tolerance is enabled on a VM
    When symmetric multiprocessor (SMP) Fault Tolerance is enabled on a VM, the VM network latency might go up significantly in both average and variations. The increased latency might result in significant performance degradation or instability for VM workloads that are sensitive to such latency increases. This release significantly reduces the increase in the VM network latency when Fault Tolerance is enabled.

No comments:

Post a Comment

Thanks for your comment!